Home > Uncategories > CCIE Security Discussion

CCIE Security Discussion

CCIE Security Written & Lab Exam : Discussion & Sharing

All old posts will be archived automatically.
Sellers & Scammers no allowed.

  1. admin
    July 12, 2019 at 3:37 am

    We are here to share our Lab exam views, discussions and topics.
    This forum will help you to keep yourself updated for the exam preparations.

  2. dull
    July 24, 2019 at 3:09 am

    Hey guys, I was wondering if anyone completed WSA redirection process in EVE when user connecting via IPsec VPN on client-1.

    Do we need to add static route for 172.16.1.0/24 from R3 all the way back to ASA1 ?
    Is ip wccp source interface required ?

  3. calawa
    July 24, 2019 at 3:10 am

    add these static routes on R1/R2/R3 as shown below. no static route on ASA1V because it is directly connected to network 172.16.1.0/24

    R1: ip route 172.16.1.0 255.255.255.0 10.1.11.1
    R2: ip route 172.16.1.0 255.255.255.0 10.1.12.1

    R3: ip route 150.1.7.0 255.255.255.0 10.1.23.2

    • dull
      July 24, 2019 at 3:10 am

      Thanks, what about 192.168.101.3 and 192.168.102.3, I think they need to be advertised via EIGRP, I think ASA1 needs to know for 192.168.101.3 and 192.168.102.3

      • calawa
        July 24, 2019 at 3:11 am

        Yes, 192.168.101.0/24 and 192.168.102.0/24 needs to advertised under eigrp on R3. I think this is already pre-configured, if not advertise them. Also, make sure http is enabled on R3 as shown below:
        ip http server
        ip http port 8080

  4. charles
    July 24, 2019 at 3:11 am

    Another option is you can add a summary route under the ASA interface facing R1. That’s faster. It injects default route to R1, R2 and R3

  5. Anonymous
    July 24, 2019 at 3:12 am

    Its just basic routing bro. 150.1.7.0/24 is the subnet the WSA leaves off. After redirecting, if the webserver (R3) does not know how to get back to WSA, then it drops the traffic. Makes sense?

  6. was
    July 24, 2019 at 3:15 am

    Hi,

    can we run complete CCIE Security LAB in EVE. i have following server.

    Dell PowerEdge R710
    Processor 2 x E5645 Hexa Core
    Ram 128 GB (16x8GB)
    1 TB SAS
    RAID
    Dual Power
    Quad Port NIC

    Please confirm above specification is enough to run complete CCIE Security LAB in EVE. I need help to configure EVE in my server. I have no experience with EVE. So any body willing to help. If above specification of Server is not good, please suggest what is recommended.

    • michel
      July 24, 2019 at 3:16 am

      Yes the spec is reasonable to go with Sec v5 Lab for EVE

      For full LAB you may need some physicals

      1. any old 3750
      1. Cisco VoIP Phone
      1. WAP for Wifi Testing

  7. dany
    July 24, 2019 at 3:17 am

    You can easily run it…

  8. rahu
    July 24, 2019 at 3:21 am
  9. kamui
    July 24, 2019 at 3:21 am

    thanks again to Rahul Sec hero for your outstanding works !
    E

  10. mikehediya
    July 24, 2019 at 3:24 am
  11. bukhari1
    July 24, 2019 at 3:26 am

    What is cli password for FMC / FTD / WSA and other Vm?

    without password root password, there no point to use it.

  12. taken
    July 24, 2019 at 3:58 am

    Has anyone been able to get the images to startup at all, let alone getting to the cli of the FTD/WSA…etc?

  13. mikehediya
  14. taken
    July 24, 2019 at 4:00 am

    Thanks mate, that was the missing piece. Works like a charm now!

  15. zoyeb
    July 24, 2019 at 4:01 am

    link not working

  16. taken
    July 24, 2019 at 4:01 am

    Does anyone have the whole file to become seed? There is no one.

  17. henry
    July 24, 2019 at 4:02 am

    please is this a cracked version or I need to buy the eve pro license keys

  18. Pierre
    July 24, 2019 at 4:02 am

    Are the console credentials admin/eve? I receive incorrect credentials using that.

  19. jortega
    July 24, 2019 at 4:03 am

    I had the same issue. Just generated a new license for IOL from scratch and run the IOL image from CLI to test, as described below URL
    http://eve-ng.net/documentation/howto-s/62-howto-add-cisco-iou-iol

  20. mikehedi
    July 24, 2019 at 4:04 am

    After adding EVE ,connect to the EVE using putty or from its console and run all given commands ,
    Your EVE should access to Internet with a working DNS ,

Comment pages
1 2 3
  1. No trackbacks yet.

Leave a Reply

Your Details will Not be published